> Products > Image & Video Products > Fisheye Image Processor
GL3004
Overview

Genesys Logic GL3004 is a high performance and feature-rich fisheye image processor optimized for a wide range of image sensors and fisheye lenses, supporting powerful fisheye correction methods including customized fisheye correction, spherical panorama dewarping, perspective projection dewarping, and achieve nine dewarping modes to enhance the wide-angle visual perception. In addition, the GL3004 embeds hardware image signal processor (ISP), wide dynamic range (WDR), OSD function and support input resolution up to 3 megapixels, providing real-time and superior visibility technology for wide-angle camera applications.


The GL3004 integrates fisheye correction engine, image processor, display engine, MCU 8051, memory controller and common interface, including 2-lane MIPI (TX/RX), DVP (in/out) and BT601/656/1120 output interfaces. The SPI flash and DDR2 memory are also embedded in the GL3004 MCP package in order to reduce product PCBA area.   

GL3004 is a dedicated fisheye image processor for wide-angle application. The proprietary dewarping engine provides various mathods of fisheye correction. The complete image signal processing (ISP) offers true color processing capabilities.The display engine accomplishs a rich dewarping effect that satisfies the diversity of wide-angle scenes and enhances human visual experience. The detail features of the GL3004 are described below:

 

 

1.1 Fisheye Correction Modes

  • Customized Fisheye Correction
  • Spherical Panorama Dewarping
  • Perspective Projection Dewarping

1.2 Dewarping Display Modes

  • Three views Stitching
  • Panorama View
  • Single View
  • Bird View
  • Corner Views
  • Multi-Views
  • 360°and ePTZ
  • Mirror/Flip

1.3 OSD

  • 4-Layer Graphic OSD
  • Dynamic Overlay  
  • Font OSD  

1.4 Hardware ISP

  • Bad Pixel Correction
  • Gr/Gb Green Balance
  • Black Level Compensation
  • Lens Shading Correction
  • Denoise
  • Edge Enhancement
  • Bayer Patten Interpolation (Color Interpolation)
  • Auto-White-Balance
  • Auto-Exposure
  • Color Correction Matrix
  • Gamma
  • YUV Processing (for brightness, contrast, hue, gain, and offset processing)
  • Wide Dynamic Range (WDR)  

1.5 Inputs/Outputs, Video Formats

  • Input interface: 2-lane MIPI or 12-bit parallel
  • Output interface: 2-lane MIPI or 12-bit parallel or BT601/656/1120
  • Input resolution up to 3M @30fps
  • Input data format:
  • 8/10/12-bit Bayer RAW
  • Output resolution up to 2M @30fps or 3M @20fps  
  • Output data format:
  • 8/10/12-bit Bayer RAW
  • 8/16-bit YUV 4:2:2

1.6 Cyclone-8051 CPU

  • Cyclone-8051 is an improved and compatible with the legacy 8-bit 80C51/52 CPU
  • A 4-stage pipeline architecture that enables to execute most of the instructions in a single clock cycle
  • Speed is on average 9 times faster than the legacy 80C51/52

1.7 PLL A

  • Reference Clock: 24MHz
  • Clock Output 1: 1056MHz ~ 384MHz. Step : 48MHz
  • Clock Output 2 = Clock Ouptut 1 divided by 2
  • SSC (Spread Spectrum Clocking) function

1.8 PLL B

  • Reference Clock: 24MHz
  • VCO Clock: 384MHz ~ 499.2MHz. Step : 4.8MHz
  • Clock Output 1 = VCO Clock divided by 2 ~ 4
  • Clock Output 2 = VCO Clock divided by 5 ~ 9
  • SSC (Spread Spectrum Clocking) function

1.9 Memory Controller

  • DDR2 mode & signaling; rates from 100Mbps up to 800Mbps
  • 1.8V/1.5/1.2V SSTL JEDEC standard
  • Multiple drive strengths adjustable
  • Independent read and write timing adjustments with auto calibration
  • Per bit de-skew support
  • PVT compensation and timing calibration for all corner reliability

1.10 MIPI Interface

  • Mixed-signal D-PHY mixed-signal hard-macro-HS/LS Transmitter and LS/HS Receiver solution
  • Designed to MIPI® v1.0 Specifications
  • 1.0GHz maximum data transfer rate per lane
  • Expandable to support 2 data lanes, providing up to 2Gbps transfer rate
  • HS, LP and ULPS modes supported
  • 10Mbps per lane in low-power mode
  • Unidirectional and bi-directional modes supported
  • Automatic termination control for HS and LP modes
  • Low-Power dissipation: less than 3mA/Lane in HS TX/RX mode
  • Tx/Rx Buffers with tunable On-Die-Termination and advanced equalization
  • Embedded ESD, boundary scan support logic

1.11 System Feature

  • SPI Master, TWI Bus interfaces
  • UART, GPIOs

1.12 Electrical Specifications

  • Power Supplies: 1.2V ±10%, 1.8V ±10%, 3.3V ±10%
  • Typical power consumption: < 600mW for DVP @input 1080P30, output 720P30

1.13 Package

  • QFN76 MCP (Multi Chip Package) with 128Mbit DDR2 DRAM and 2Mbit SPI Flash dies

1.14 Operating Temperature

  • Industrial Grade: -40°C to 85°C

Copyright ◎2024 創惟科技股份有限公司 All Rights Reserved.